VE Voice Command
Firmware
Flash firmware in your browser. Connect a USB-C data cable first.
Browser requirements
Chrome / Edge Desktop
How to use
- use USB-C data cable Connect the VE Voice Command to your computer
- Click the "Install Firmware" button below
- Select the corresponding serial device in the pop-up window (the name usually contains usbmodem or ESP32-S3）
- Wait for the flashing to complete and the device will automatically restart.
- If the device does not restart automatically, replug and unplug the device and try again.
Prepare to flash
After connecting the device, click the button and the browser will pop up the serial port selection window.
Your browser does not support Web Serial.
Please use Chrome or Edge Access this page from a desktop browser.
This page requires access via HTTPS to use the firmware flashing feature.
Things to note
- Only supports Chrome / Edge Desktop browser (Safari, Firefox, iOS not supported)
- Please use data cable rather than a charging cable (the charging cable has no data transmission function)
- Do not disconnect the USB connection during the flashing process
- If the device cannot be found in the serial port list, replug and unplug the device and try again.
- If you need to clear the device status, please check "Erase device" in the flash window.